PL2303 USB-TTL Cable Driver Installation

This installation has been tested to work on Windows 10, and can be expected to work on 64-bit Windows OS version from year 2008 and after. Download the driver file from http://deeptronic.com/download/pl2303-old-driver.zip and extract the file Plug the USB converter cable, newest driver might be automatically installed. Open Device manager, select the detected port, right click and select Update Driver […]

Read more

BSDEV-PDL Blackstomp Development-Mode Pedal Manual

Blackstomp is a digital audio effect processor development platform based on ESP32-A1S module. To speed up the effect pedal development cycle, Blackstomp provides a standard development-mode pedal to quickly test and run your application program. In this manual document, you will find the following information: I. Schematic Diagram II. Port and Knobs Layout III. External Connection III.1. Guitar/Line Input/Output III.2 […]

Read more

BSMP-BRD Blackstomp Board Manual

Table of Contents I. Schematic Diagram II. Bill of Materials III. Port Connector Layout IV. Potentiometer and Toggle Switch Mounting IV.1. Potentiometer Mounting IV.2. Toggle Switch Mounting IV.3. Reducing Enclosure Mounting Stress V. Development-Mode Wiring V.1. Wiring Diagram V.2. Bill of (Offboard) Materials VI. Firmware Programming Through Onboard UART Connector VII. Universal Drill Templates I. Schematic Diagram II. Bill of […]

Read more

BSMP-PCB Blackstomp PCB Manual

Table of Contents I. Schematic Diagram II. Bill of Materials III. PCB Layout IV. Port Connector Layout V. Manual SMD Component Soldering VI. Onboard Potentiometer and Toggle Switch Mounting VI.1 Potentiometer Mounting VI.2 Toggle Switch Mounting VI.3 Reducing Enclosure Mounting Stress VII. Development-Mode Wiring VII.1. Wiring Diagram VII.2. Bill of (Offboard) Materials VIII. Firmware Programming Through Onboard UART Connector IX. […]

Read more

HM936D-AM8 Digital Soldering Station Controller Chip – User and Developer Manual

Product Description HMC936D-AM8 is a controller chip for HM-936D digital soldering station controller board. The controller is implemented using ATMEGA8 microcontroller, programmed with lock protection to disable the chip for being read or modified. It runs on 8MHz  internal factory calibrated RC clock, so there is no need to provide XTAL and its related capacitors. The operational menu, custom sensor […]

Read more